Shop
Controlador CO2 Digital Evolution Sonda
– Dosificador inteligente de CO2 multi-etapa.
– Sonda para medir el CO2.
– Controla la extracción Co2
– Compatible con botellas de CO2
– Compatible: Generadores de propano de CO2.
– Multilenguaje (Español, Francés, Ingles, Alemán, Italiano)
– Posibilidad de ampliarlo con otros controladores Ecotechnics.
– Sensor de luz para apagarse sólo por la noche.
– Manómetro con válvula solenoide.
– Panel de control.
Controlador CO2 Digital Evolution Sonda
– Dosificador inteligente de CO2 multi-etapa.
– Sonda para medir el CO2.
– Controla la extracción Co2
– Compatible con botellas de CO2
– Compatible: Generadores de propano de CO2.
– Multilenguaje (Español, Francés, Ingles, Alemán, Italiano)
– Posibilidad de ampliarlo con otros controladores Ecotechnics.
– Sensor de luz para apagarse sólo por la noche.
– Manómetro con válvula solenoide.
– Panel de control.
Controlador CO2 Dosis 2
– Invernaderos de 100 m3
– Concentracion 1.000 y 1.200 ppm
– Temporizador
– Manómetro regulador de Gas
– Componentes de alta calidad
Controlador CO2 Dosis 2
– Invernaderos de 100 m3
– Concentracion 1.000 y 1.200 ppm
– Temporizador
– Manómetro regulador de Gas
– Componentes de alta calidad
Controlador de Velocidad Satellite 4A Can Fan
El Controlador Satellite 4A de Can Fan utiliza un transformador de 4A a 6 pasos, que controlará la velocidad,
sin vibraciones ni ruidos, de uno o dos Iso-Max 1 velocidad, como extractores de aire,
o uno para extracción y el otro para la entrada de aire.
El ventilador de entrada deberá funcionar un paso detrás del ventilador de salida para asegurar una presión negativa.
Para tener un control completo, el Satellite 4A está equipado con una conexión tipo Jack que permite conectarlo,
con nuestro controlador Can Fan LCD EC, aportando las 13 funciones de control extra.
Temperatura, humedad, sensor de día y noche, velocidad mínima y máxima, etc. Funciones que hasta hoy,
solo estaban disponibles para los motores EC, ahora también para Iso-Max.
Con el primer controlador de velocidad de ventilador 100% compatible con la velocidad Iso-Max 1,
puede controlar su ventilador de una velocidad, y otros ventiladores, sin ningún Ruido o vibración.
El Satellite se puede utilizar con los siguientes productos:
Iso-Max 1 velocidad (todas las medidas).
Iso-Max 250 / 1480.
Iso-Max 250 / 2310.
Iso-Max 315 / 2380.
Iso-Max 315 / 3260.
Max Fan 250/ 1625.
Max Fan 250/1740.
Max Fan 280/2360.
Max Fan 315/3510.
Max Fan 355/2580.
Controlador de Velocidad Satellite 4A Can Fan
El Controlador Satellite 4A de Can Fan utiliza un transformador de 4A a 6 pasos, que controlará la velocidad,
sin vibraciones ni ruidos, de uno o dos Iso-Max 1 velocidad, como extractores de aire,
o uno para extracción y el otro para la entrada de aire.
El ventilador de entrada deberá funcionar un paso detrás del ventilador de salida para asegurar una presión negativa.
Para tener un control completo, el Satellite 4A está equipado con una conexión tipo Jack que permite conectarlo,
con nuestro controlador Can Fan LCD EC, aportando las 13 funciones de control extra.
Temperatura, humedad, sensor de día y noche, velocidad mínima y máxima, etc. Funciones que hasta hoy,
solo estaban disponibles para los motores EC, ahora también para Iso-Max.
Con el primer controlador de velocidad de ventilador 100% compatible con la velocidad Iso-Max 1,
puede controlar su ventilador de una velocidad, y otros ventiladores, sin ningún Ruido o vibración.
El Satellite se puede utilizar con los siguientes productos:
Iso-Max 1 velocidad (todas las medidas).
Iso-Max 250 / 1480.
Iso-Max 250 / 2310.
Iso-Max 315 / 2380.
Iso-Max 315 / 3260.
Max Fan 250/ 1625.
Max Fan 250/1740.
Max Fan 280/2360.
Max Fan 315/3510.
Max Fan 355/2580.
Controlador Digital (HID+LED) 2.0 Lumatek
Artículos incluidos:
1 x panel de control de Lumatek
1 x cable de alimentación
Cable de sensor de temperatura de 2 x 5 m
2 x 5 m de cable de control ‘Link’
Controlador Digital (HID+LED) 2.0 Lumatek
Artículos incluidos:
1 x panel de control de Lumatek
1 x cable de alimentación
Cable de sensor de temperatura de 2 x 5 m
2 x 5 m de cable de control ‘Link’
Controlador EC MC-745 con 2 Bomba Dosificadora Milwaukee
MC745 Controlador Dosificador Nutrientes A + B es un medidor de EC continuo con dos bombas dosificadoras de abonos liquidos.
Controlador EC MC-745 con 2 Bomba Dosificadora Milwaukee
MC745 Controlador Dosificador Nutrientes A + B es un medidor de EC continuo con dos bombas dosificadoras de abonos liquidos.
Controlador GSE de Agua 15 Amp
– Diseñado para trabajar con 1800W y 15A como máximo
– Dimensiones: 145mm x 100mm x 90mm
– Voltaje: 230v/50Hz
– Certificado de protección IP44
– Impulso de agua por riego: de 1s a 20 min
– Intervalo de riego: de 1s a 16h
Controlador GSE de Agua 15 Amp
– Diseñado para trabajar con 1800W y 15A como máximo
– Dimensiones: 145mm x 100mm x 90mm
– Voltaje: 230v/50Hz
– Certificado de protección IP44
– Impulso de agua por riego: de 1s a 20 min
– Intervalo de riego: de 1s a 16h
Controlador GSE Humedad y Deshumedad
– Controla la velocidad mínima, la presión, la Temperatura y Humedad.
– Para extractor y intractor.
– Diseñado para: 2x600W / TRIAC 2x16A.
– Voltios: 230V / 50HZ.
Controlador GSE Humedad y Deshumedad
– Controla la velocidad mínima, la presión, la Temperatura y Humedad.
– Para extractor y intractor.
– Diseñado para: 2x600W / TRIAC 2x16A.
– Voltios: 230V / 50HZ.
Controlador GSE Temperatura + Baja Presion
– Controlador: WxHxD = 160x100x90mm
– Diseñado para: 2A / 2x200W / TRIAC 2x16A
– Diseñado para: 16A / 3600W / TRIAC 2x45A
– Voltios: 230V / 50Hz 5V sensor digital.
– Temperaturas de -55 ° C a + 125 ° C (-67 ° F a + 257 ° F).
– Precisión de 0,5 ° C de -10 ° C a + 85 ° C.
– Protección IP44
– Temperatura: 20 ° C ° a -30C °
– Velocidad mínima: off, 20% -100%
– Presión negativa: 100% a -50%
Controlador GSE Temperatura + Baja Presion
– Controlador: WxHxD = 160x100x90mm
– Diseñado para: 2A / 2x200W / TRIAC 2x16A
– Diseñado para: 16A / 3600W / TRIAC 2x45A
– Voltios: 230V / 50Hz 5V sensor digital.
– Temperaturas de -55 ° C a + 125 ° C (-67 ° F a + 257 ° F).
– Precisión de 0,5 ° C de -10 ° C a + 85 ° C.
– Protección IP44
– Temperatura: 20 ° C ° a -30C °
– Velocidad mínima: off, 20% -100%
– Presión negativa: 100% a -50%
Controlador GSE Temperatura + Histeresis 10 amp + Velocidad minima
– Controlador Temperatura
– Histeresis 10 amp.
– Regulador de extracción
– Controlador : 160x100x90mm
– Diseñado para: 1×2.300W / TRIAC 1x45A
– Voltios: 230V / 50Hz
– Digital sensor 5V
– Mide temperaturas de -55 ° C a +125 ° C (-67 ° F a +257 ° F)
– Precisión de -10 ° C a +85 °
– Clase de protección IP44
Controlador GSE Temperatura + Histeresis 10 amp + Velocidad minima
– Controlador Temperatura
– Histeresis 10 amp.
– Regulador de extracción
– Controlador : 160x100x90mm
– Diseñado para: 1×2.300W / TRIAC 1x45A
– Voltios: 230V / 50Hz
– Digital sensor 5V
– Mide temperaturas de -55 ° C a +125 ° C (-67 ° F a +257 ° F)
– Precisión de -10 ° C a +85 °
– Clase de protección IP44
Controlador GSE Temperatura + Humedad + Baja Presion
– Temperatura: 20 ° C ° – 30C °
– Humedad: 30% – 100%
– Velocidad mínima: off, 20% – 100%
– Presión negativa: 100% – 50%
– Casco: WxHxD = 130x80x70mm
– Controlador: WxHxD = 160x100x90mm
– Diseñado para: 2x200W / TRIAC 2x16A
– Voltios: 230V / 50Hz
– Temperaturas Medidas 5V
– Sensor digital de -55 ° C a + 125 ° C (-67 ° F a 257 ° F)
– Exactitud 0.5 ° C de -10 ° C a + 85 ° C
– Precisión la humedad ± 4,5% HR
– Clase de protección IP44
Controlador GSE Temperatura + Humedad + Baja Presion
– Temperatura: 20 ° C ° – 30C °
– Humedad: 30% – 100%
– Velocidad mínima: off, 20% – 100%
– Presión negativa: 100% – 50%
– Casco: WxHxD = 130x80x70mm
– Controlador: WxHxD = 160x100x90mm
– Diseñado para: 2x200W / TRIAC 2x16A
– Voltios: 230V / 50Hz
– Temperaturas Medidas 5V
– Sensor digital de -55 ° C a + 125 ° C (-67 ° F a 257 ° F)
– Exactitud 0.5 ° C de -10 ° C a + 85 ° C
– Precisión la humedad ± 4,5% HR
– Clase de protección IP44
Controlador GSE Temperatura + Velocidad Mínima
– Voltios: 230V / 50Hz
– Casos: WxHxD = 130x80x70mm
– Controlador: WxHxD = 160x100x90mm
– Diseñado para: 1A / 200W / TRIAC 1x16A
– Medidas 5V sensor digital temperaturas de -55 ° C a + 125 ° C (-67 ° F a + 257 ° F)
– Una precisión de 0,5 ° C de -10 ° C a + 85 ° C
– Clase de protección: IP44
– Temperatura: 20 ° C ° a -30C °
– Velocidad mínima: off, 20% -100%
Controlador GSE Temperatura + Velocidad Mínima
– Voltios: 230V / 50Hz
– Casos: WxHxD = 130x80x70mm
– Controlador: WxHxD = 160x100x90mm
– Diseñado para: 1A / 200W / TRIAC 1x16A
– Medidas 5V sensor digital temperaturas de -55 ° C a + 125 ° C (-67 ° F a + 257 ° F)
– Una precisión de 0,5 ° C de -10 ° C a + 85 ° C
– Clase de protección: IP44
– Temperatura: 20 ° C ° a -30C °
– Velocidad mínima: off, 20% -100%
Controlador Humedad Cornwall Electronics
– Voltaje de utilización: 230V AC/50HZ
– Carga de Resistencia: 16A 3680W
– Carga inductiva: 2A 460W
– Temperatura de utilización: 5ºC ~ 40°C.
– Temperatura de almacenaje: -10°C ~ 50°C
– Escala para el control de la humedad:30%—90%.
– Precisión ±5%
– Periodo de medida: 10 S.
– Escala de temperature en pantalla: 0°C (32°F) ~40°C (104°F)
Controlador Humedad Cornwall Electronics
– Voltaje de utilización: 230V AC/50HZ
– Carga de Resistencia: 16A 3680W
– Carga inductiva: 2A 460W
– Temperatura de utilización: 5ºC ~ 40°C.
– Temperatura de almacenaje: -10°C ~ 50°C
– Escala para el control de la humedad:30%—90%.
– Precisión ±5%
– Periodo de medida: 10 S.
– Escala de temperature en pantalla: 0°C (32°F) ~40°C (104°F)
Controlador LCD Extractores EC Can Fan
– Controla 10 extractores EC Can Fan
– Controla temperatura y humedad
– Velocidad mínima y máxima de extracción e intracción.
– Presión negativa para evitar salida de olores fuera de la sala
– Configuración separada para día y noche.
Controlador LCD Extractores EC Can Fan
– Controla 10 extractores EC Can Fan
– Controla temperatura y humedad
– Velocidad mínima y máxima de extracción e intracción.
– Presión negativa para evitar salida de olores fuera de la sala
– Configuración separada para día y noche.
Controlador PH MC-720 con Bomba Dosificadora Milwaukee
El controlador dosificador PH MC720. Es un medidor continuo, capacitado para activar una bomba dosificadora de corrector PH (PH minus o PH más).
Controlador PH MC-720 con Bomba Dosificadora Milwaukee
El controlador dosificador PH MC720. Es un medidor continuo, capacitado para activar una bomba dosificadora de corrector PH (PH minus o PH más).
Controlador Ram Air-Pro II Temperatura + Velocidad Mínima
Especificaciones Técnicas:
– Controla 2 ventiladores de extracción en línea.
– 1 Sensor remoto para termostato, 2 m.
– Control variable de temperatura.
– Control variable de la velocidad del ventilador
– Pantalla digital.
– 1 cable de alimentación 2 m.
Controlador Ram Air-Pro II Temperatura + Velocidad Mínima
Especificaciones Técnicas:
– Controla 2 ventiladores de extracción en línea.
– 1 Sensor remoto para termostato, 2 m.
– Control variable de temperatura.
– Control variable de la velocidad del ventilador
– Pantalla digital.
– 1 cable de alimentación 2 m.
Controlador SPC MK2 – 8Ampere SMSCOM
– Control de temperatura electrónico y preciso.
– Ajuste del ventilador mínimo y máximo.
– Sensor de temperatura NTC de 5 metros incluido.
– Fusible de repuesto incluido.
– Se puede vincular a un módulo auxiliar.
Controlador SPC MK2 – 8Ampere SMSCOM
– Control de temperatura electrónico y preciso.
– Ajuste del ventilador mínimo y máximo.
– Sensor de temperatura NTC de 5 metros incluido.
– Fusible de repuesto incluido.
– Se puede vincular a un módulo auxiliar.
Controlador Temperatura Cornwall Electronics
• Voltaje de utilización: 230V AC/50HZ
• Carga (máx.):
16A 3680W – Carga de Resistencia.
2A 460W – Carga inductiva.
•Temperatura de utilización: 0ºC ~ 40°C.
•Temperatura de almacenaje: -10°C ~ 50°C
•Escala de control de la temperatura: 5°C
(40°F) ~ 30°C(85°F); Precisión:±1°C; Periodo
de medida: 10 S.
Controlador Temperatura Cornwall Electronics
• Voltaje de utilización: 230V AC/50HZ
• Carga (máx.):
16A 3680W – Carga de Resistencia.
2A 460W – Carga inductiva.
•Temperatura de utilización: 0ºC ~ 40°C.
•Temperatura de almacenaje: -10°C ~ 50°C
•Escala de control de la temperatura: 5°C
(40°F) ~ 30°C(85°F); Precisión:±1°C; Periodo
de medida: 10 S.
Controlador Temperatura + Humedad Evolution
– Tensión 230-240V
– Potencia: 15W
– Control de la calefacción hasta un máximo de 3Kw
– Algoritmo de control avanzado
– Visualización en vivo de temperatura / humedad e interfaz para controlador Evolution CO2
– Sensor de temperatura / humedad (cable 5m)
– Totalmente compatible con el Controlador Evolution CO2
– Totalmente programable, con control de temperatura, humedad, velocidad máxima y mínima (ralentí) del ventilador
Controlador Temperatura + Humedad Evolution
– Tensión 230-240V
– Potencia: 15W
– Control de la calefacción hasta un máximo de 3Kw
– Algoritmo de control avanzado
– Visualización en vivo de temperatura / humedad e interfaz para controlador Evolution CO2
– Sensor de temperatura / humedad (cable 5m)
– Totalmente compatible con el Controlador Evolution CO2
– Totalmente programable, con control de temperatura, humedad, velocidad máxima y mínima (ralentí) del ventilador
Controlador Temperatura y Velocidad Extractores EC Can Fan
Can Fan Controller EC para velocidad.
Se utiliza para controlar los extractores Can Fan con motores EC.
Con un solo controlador se puede controlar hasta 10 extractores a la vez.
El controlador EC se conecta de modo plug and play.
Para conectar varios extractores entre ellos solo se necesita utilizar un ladrón
debido a que la conexión es una conexión Jack.
Controlador Temperatura y Velocidad Extractores EC Can Fan
Can Fan Controller EC para velocidad.
Se utiliza para controlar los extractores Can Fan con motores EC.
Con un solo controlador se puede controlar hasta 10 extractores a la vez.
El controlador EC se conecta de modo plug and play.
Para conectar varios extractores entre ellos solo se necesita utilizar un ladrón
debido a que la conexión es una conexión Jack.
Controlador TWIN MK2 4.5A SMSCOM
– Control de temperatura electrónico y preciso.
– Ajuste del ventilador mínimo y máximo.
– Sensor de temperatura NTC de 5 metros incluido.
– Fusible de repuesto incluido.
– Carga max.: 4,5 amperios.
Controlador TWIN MK2 4.5A SMSCOM
– Control de temperatura electrónico y preciso.
– Ajuste del ventilador mínimo y máximo.
– Sensor de temperatura NTC de 5 metros incluido.
– Fusible de repuesto incluido.
– Carga max.: 4,5 amperios.
Controlador TWIN MK2 7A SMSCOM
– Control de temperatura electrónico y preciso.
– Ajuste del ventilador mínimo y máximo.
– Sensor de temperatura NTC de 5 metros incluido.
– Fusible de repuesto incluido.
– Carga max.: 7 amperios.
Controlador TWIN MK2 7A SMSCOM
– Control de temperatura electrónico y preciso.
– Ajuste del ventilador mínimo y máximo.
– Sensor de temperatura NTC de 5 metros incluido.
– Fusible de repuesto incluido.
– Carga max.: 7 amperios.